There are so many things that Thoro flush can do. For instance, it could be used to clean engine cooling system. Irontite Thoro flush is something that usually comes in powder form. It is created to remove all sorts of dust and scale from the metal surfaces and in the end brings them back to a new condition. The good thing about it is that it does not stand to harm thermostats or even pumps. You should also be aware of the fact that Thoro flush is so far the strongest coolant flush on the market. It is something that could be used when it comes to clearing out gelled coolant and at the same time opening up plugged cores of heaters. When the cooling systems are quite rusty and scaled at the same time, the heat build up on the engine would increase. Hence, when your vehicle ever overheats, you should get the Thoro flush so that it could cool again.
The other thing that you should know about Thoro flush at http://irontite.com/thoro-flush/ is that it cleans dirty fuel tanks. We all know that cleaning a fuel tank is something that could be very tedious. There are those manufacturers who would recommend that people use soap and water to reach into the pipe and wipe it clean but the whole process is way easier while using Thoro flush.
It is important to take note of the fact that Thoro flush could also be used in the removal of gelled Dex-cool. This is something that has been done by very many people from long time ago. Whenever you use Dex-cool by mixing it with non-dex cool kinds of antifreezes, you would be creating some chemical reaction and this would ensure that you get to turn the cooling system coolant into a very thick gel. After that you would notice that the engine would greatly overheat from the vehicle’s heater. You should also be aware of the fact that getting Dex-cool out of any vehicle could be a very difficult job that is also very time consuming. You could use just one pint of Thoro flush to simply clean, unplug and even restore a coolant system to a very new condition. Check this site to know more!
Thoro flush has also been used when it comes to making coolant flow better and bring about increased fuel pump life. This is because it would remove the scale and rust that slows down the flow the coolant when you are using it on your cooling system. It also works to remove completely the foreign materials that could accumulate in your fuel tank. Be sure to watch this video at https://www.youtube.com/watch?v=sAk5tc_gpmo for more info about ceramic motor.